109171 - Wheel Cylinder - Girling 7/8 Inch Bore - 670404
|IPD ITEM NUMBER||109171|
|Classification||Repair & maintenance|
|Quality Level||Good (aftermarket)|
|Units Per Car||2|
|Warranty||One Year Parts Warranty|
|Specifications||7/8 INCH BORE 1.75 INCH (44.5MM) BOLT SPACING|
Just because you have drum rear brakes doesn't mean that you should have to settle for marginal braking. Next time you have the drums off, inspect the wheel cylinders - this is especially important because most models with drum rear brakes use only one circuit, unlike the newer Volvos. Check for signs of leaking brake fluid (any is too much) and pay special attention to the rubber boots; cracks are a sign of age. Good brakes are critical - we recommend replacing worn parts with new instead of rebuilt.
To help verify the cylinder without pulling the drum off, you can measure the bolt hole spacing (that holds the cylinder to the backing plate). Wagner cylinders have 1 1/4” center-to-center spacing. Girling have 1 3/4” spacing.
Potential Product Fitment Issues
Volvo used a couple different size brake cylinders on these models.
To ensure correct ordering, please inspect and measure the wheel cylinders currently installed on your car.
Product Status & Availability
Adding items to your shopping cart and placing an order is only an intent to purchase. We will not charge you for anything until we can ship the products you ordered (if paying by credit card. PayPal is a prepayment method.) We will do everything we can to fill your order in a timely manner. You can cancel your order at any time prior to shipment.
This non-stocked product is available to order plus backorders are allowed.
Additional stock typically takes 30 days or less for it to arrive and get packed for shipping.
|Units available to ship:||3|