Airbox Thermostat Valve
Calorstat - 1266826 - 103083
- IPD Item Number: 103083
- Brand: Calorstat
- Quality Level: Good (aftermarket)
- Units Per Car: 1
- Manufacturer Part Number: 1266826
- OE Reference: 1266826
- Product Group: Repair & maintenance
- Warranty: One Year Parts Warranty
- Cross Reference: 1266826, 14453011087, 70411, 704110
Product Attributes
- IPD Item Number: 103083
- Brand: Calorstat
- Quality Level: Good (aftermarket)
- Units Per Car: 1
- Manufacturer Part Number: 1266826
- OE Reference: 1266826
- Product Group: Repair & maintenance
- Warranty: One Year Parts Warranty
- Cross Reference: 1266826, 14453011087, 70411, 704110
Product Information
Product Description
Many gas powered Volvos have a simple, thermostatically controlled shutter valve in the air filter box. This thermostat regulates the flow of fresh and pre-heated air in to the intake system. (Pre-heated air comes to the air filter box through the aluminum pre-heat hose that is connected between the air filter box and the exhaust manifold or downpipe.
It is common for the thermostatic valve to fail in the pre-heated air position. This routes super heated air through the Mass Air Flow sensor (air mass meter.) Left upchecked, the MAF will soon fail. It will also cause the engine to run very inefficiently as the engine management will excessively lean out the fuel mixture in response to the hot air. Engine management systems were never designed to run with ambient air in excess of 400°F.
Check your system on a day when the ambient temperature is above 50°F. The valve should be fully open to fresh air (not pre-heated.) If it is open to the pre-heat side, then you should replace the thermostat. Also, if the valve fails to reach full extension at hot and cold extreme, replace it.
This thermostat is part of an emission control which means we cannot give you advice on defeating this system.
If the thermostatic valve is stuck in the hot position then super heated air will be routed in to your engine. This will cause a loss in economy/efficiency and in many cases will cause the MAF sensor to fail.
Additional Keywords: THERMOSTATE
Technical Tips & Articles
Vehicle Fitment Guide
Kits & Kit Builders Containing This Product
Similar or Comparable Products
Similar or Comparable Products
Recommended Products
You might need some of these products
You might be interested in these products
Shipping Estimate
Product Reviews
Policies & Warranty
A Core Charge is a refundable deposit added to the price of a product by a manufacturer as a bounty to encourage the return of rebuildable cores.
Cores must be complete (mostly assembled and not missing parts) to qualify for refund.
Cores must be complete returned in the manufacturer's box with part number markings to qualify for refund. Typically, the core is returned in the box that contained the replacement product.
Core return and any shipping associated with it is the customer's responsibility.
Available to Order means the item is readily available from one or more supplier warehouses and should be available to ship within a timely manner (unless otherwise noted on the product listing.)
Products from major brand names like Volvo Genuine, Bosch, Mahle, Aisin, etc. are almost always in stock in the manufacturer’s domestic warehouse. These suppliers have good fill rates, but even if they are out of stock, we may be able to source it from a variety of alternative source. We are at the most 10 days away from all those warehouses, usually much less. Does that mean we will always have your product available within that window? Honestly, no. There are many factors that can delay things by a few days but we’ll do everything we can to fulfill your order in a timely manner.