124548 - Inner Tie Rod - CAM Rack - 200 - 9140505
|IPD ITEM NUMBER||124548|
|Classification||Repair & maintenance|
|Quality Level||Good (aftermarket)|
|Units Per Car||2|
|Warranty||One Year Parts Warranty|
|CROSS REFERENCE||9140505, 1387451, 43953007500, 5160305529|
- Policies &
Tie rods are key components in your Volvo's front suspension and steering system. Since the late 1960's, the ball joints on most Volvos have been of the lifetime design, i.e. no grease fittings for lubrication.
Under normal conditions they can last for over 100,000 miles. When abused or used in unusually rough road conditions the life span can be greatly reduced. When a ball joint or tie rod begins to wear it will usually increase the amount of effort required to steer the car.
Once wear has started, these parts usually will deteriorate rapidly as the load generated by the suspension and transferred through the ball joints and tie rods is very great. Typically you will begin to notice some looseness in the steering or you may notice that your Volvo has a difficult time holding a straight line down the road.
Although the parts aren't terribly difficult to inspect, you should have a good workshop manual handy for reference. If you suspect you've got a problem in the front end, make a point of inspecting these parts soon.
To determine whether you have a ZF rack or Cam rack most 240's had Service Plates (or labels) to designate the type of rack. 1978-79 the plate was on the door pillar. On 1980-93 the plate was on sheet metal between the grille and radiator (viewed by lifting the hood). Find the label of Steering gear (on the plate) and next to it will be a single digit code. 2, 4 & 5 indicate Cam racks, 3 indicates ZF.
This inner tie rod only fits models equipped with CAM brand racks and a male threaded inboard end.
Potential Product Fitment Issues
240 models came with a couple different brand steering racks installed from the factory. In addition, many of thse cars have had steering racks swapped, and many times not with the same style rack.
This inner tie rod fits 240 models with CAM brand steering rack and MALE threads on the inboard end.
This inner tie rod is generall found on 1988-1993 240 models. To ensure correct ordering, please verify what is currently equipped on your car.
Product Status & Availability
Adding items to your shopping cart and placing an order is only an intent to purchase. We will not charge you for anything until we can ship the products you ordered (if paying by credit card. PayPal is a prepayment method.) We will do everything we can to fill your order in a timely manner. You can cancel your order at any time prior to shipment.
This stocked product is available to order plus backorders are allowed.
We consider this a stocked product and normally try to keep some in stock. If you need more than we have available, feel free to order it and we will get it for you. It typically takes 5 days for additional stock to arrive and be packed for shipping.
|Units available to ship:||4|