114280 - High Flow Downpipe - FWD Straight Flange Turbo Outlet
|IPD ITEM NUMBER||114280|
|QUALITY LEVEL||BEST (BETTER THAN OE)|
|UNITS PER CAR||1|
|WARRANTY||ONE YEAR PARTS WARRANTY|
ipd 3” turbo downpipes are made of 304 stainless steel and use premium hi-flow 3” Metalcats with spun housings for maximum air flow. Our downpipes are 100% handmade here in the US to our specifications and feature articulating flex joints to aid in the installation and to provide a long life of vibration free performance and to help prevent cracking form undue stress.
These downpipes are made exclusively for ipd by CJ Yother. CJ is well known among the performance Volvo community for his commitment to quality and performance along with his signature craftsmanship you have to see to believe. All of our downpipes are compatible with the stock exhaust system, but for best performance you’ll want to mate them up with a nice 2.5” to 3” performance cat back exhaust system. The basic function of a hi flow down pipe is to free up the breathing so the turbo can spool up quicker and make power lower in the rpm range, basically reducing that dreaded turbo lag. Also at higher rpms, the freer breathing keep things cooler, reducing the load on the intercooler and keeping charge temps low (more power!). A common response we get from customers that have installed one of our performance downpipes is “My car feels like it rolls easier now……. It takes less throttle to get it moving and seems less strained under high loads and the mid range push in the back is stronger for a longer time.”
Install is generally very straight forward for the average DIY'er. Slight modification may be required for SAS tube alignment on downpipe bung. Additionally, you will no longer use the SAS tube to downpipe mount tab. Rear oxygen sensor placement is slightly different than factory to accomodate the new pipe, and correct OEM harness extension is included.
Not sure which downpipe fits your car?
Volvo used three different styles of turbocharger outlets in their models from 1994-2000.
We do not currently offer conical flange outlet downpipes at this time. Only a few models were equipped with the conical outlet. Fortunately all the turbo exhaust housings are interchangeable so if you do have a conical flange turbo you can change your turbo outlet housing to either a straight or angle flange and then use the correpsonding ipd downpipe.
This information should be used as a guide only as the parts your vehicle was initially equipped could have been changed out at some point. Our recommendation is to check your vehicle to be sure you select the right part as these components are large and can be costly to reship if the wrong part is selected.
Not CARB approved for California.
Disclaimer: Performance products sold by IPD have not been tested or approved by any international, federal or local governing agency for street use, thus are designated for non-road or race track use only. Although every effort is made to maintain or improve upon the emissions standards and safety of your Volvo, some of our products may not be legal for street use in your region. IPD makes no claim of fitness or certification for such use and leave it up to you to research the laws of your region.
Potential Product Fitment Issues
This downpipe fits front wheel drive (FWD) turbo models with STRAIGHT flange turbo outlet.
Product Status & Availability
Adding items to your shopping cart and placing an order is only an intent to purchase. We will not charge you for anything until we can ship the products you ordered (if paying by credit card. PayPal is a prepayment method.) We will do everything we can to fill your order in a timely manner. You can cancel your order at any time prior to shipment.
This item is an Kit-On-The-Fly product. It consists of multiple component products that are all pulled together at the time of shipping.
Additional component stock typically takes 15 days or less to arrive and get be available for shipping.
|Units available to ship:||Zero|