logo
The Volvo Parts, Accessories &
Performance Specialists Since 1963

Inner Tie Rod - CAM Rack - 200

Aftermarket - VM630 - 9140505 - 109069

Our Item Number
109069
OEM Reference
9140505
Brand
Aftermarket
Mfr Part Number
VM630
Brand Classification
OES
Units Per Car
2
Specifications
FOR CAM BRAND RACK WITH MALE THREADED INBOARD END
Warranty
ONE YEAR PARTS WARRANTY
Product Group
REPAIR & MAINTENANCE
Cross Reference
1387451, 43953007500, 5160305529, 9140505

Product Description

Description

Tie rods are key components in your Volvo's front suspension and steering system. Since the late 1960's, the ball joints on most Volvos have been of the lifetime design, i.e. no grease fittings for lubrication.

Under normal conditions they can last for over 100,000 miles. When abused or used in unusually rough road conditions the life span can be greatly reduced. When a ball joint or tie rod begins to wear it will usually increase the amount of effort required to steer the car.

Once wear has started, these parts usually will deteriorate rapidly as the load generated by the suspension and transferred through the ball joints and tie rods is very great. Typically you will begin to notice some looseness in the steering or you may notice that your Volvo has a difficult time holding a straight line down the road.

Although the parts aren't terribly difficult to inspect, you should have a good workshop manual handy for reference. If you suspect you've got a problem in the front end, make a point of inspecting these parts soon.

To determine whether you have a ZF rack or Cam rack most 240's had Service Plates (or labels) to designate the type of rack. 1978-79 the plate was on the door pillar. On 1980-93 the plate was on sheet metal between the grille and radiator (viewed by lifting the hood). Find the label of Steering gear (on the plate) and next to it will be a single digit code. 2, 4 & 5 indicate Cam racks, 3 indicates ZF.

This inner tie rod only fits models equipped with CAM brand racks and a male threaded inboard end.

Potential Product Fitment Issues

240 models came with a couple different brand steering racks installed from the factory. In addition, many of thse cars have had steering racks swapped, and many times not with the same style rack.

This inner tie rod fits 240 models with CAM brand steering rack and MALE threads on the inboard end.

This inner tie rod is generall found on 1988-1993 240 models. To ensure correct ordering, please verify what is currently equipped on your car.

Technical Tips & Articles

About Aftermarket

At IPD, we have a basket of trusted "Aftermarket" brands we pull from for fast-moving items, so we're able to get customers the right part for the job from any available source. Our Aftermarket brand umbrella covers many brands you're familiar with, like:

  • APA ÜRO
  • CRP / Rein
  • TYC
  • ProfessionalParts Sweden
  • MTC
  • Fel-Pro
  • FAE / KAE / Kaehler
  • Fram
  • AUP ProTech
  • Nissens
  • Standard Ignition Products
  • Centric
  • Beck/Arnley
  • And more!

We pick brands with a balance of good quality and good value; we trust these brands on our own cars, and we hope you will too!

Show me more products from Aftermarket

Vehicle Fitment Guide

Shipping Estimate

Product Reviews

Policies, Warranty & FAQ