The Volvo Parts, Accessories & Performance Specialists Since 1963 800-444-6473
Fuel Injection Relay

112517 - Polyurethane Upper Engine Stabilizer Mount & Bracket

loading$64.95PER KIT
IPD ITEM NUMBER112517
CLASSIFICATIONPERFORMANCE PARTS
QUALITY LEVELBEST (BETTER THAN OE)
BRANDIPD
MATERIALPOLYURETHANE
UNITS PER CAR1
WARRANTYONE YEAR PARTS WARRANTY
CROSS REFERENCE30680770
This product is specific to particular car models. You should check fitment for your car before buying.

Product Description

The original rubber engine stabilizer mount has proven to be a weak link that that can fail prematurely and allow the engine to rock and move during acceleration and braking, significantly affecting the handling and performance of the car. This mount is located near the top of the engine on the backside just to the right of center, connecting the engine to the firewall. The original mount requires a special Volvo press tool for removal and installation.

Our improved polyurethane material is stronger (we warranty it for life) and the 2 piece design allows for easy installation without special tools. The original mount is covered under the basic Volvo warranty, however we have heard from customers that have had the original rubber mount replaced several times. To inspect your mount, look for signs of the rubber separating where it is attached to the outer housing.

Most 2005 models and all 2006 and later models with 5 cylinder engines use a square style upper engine mount. If you have the sqaure style mount and would like to upgrade to the ipd heavy duty mount this is the part you need. This kit includes our HD poly mount with round mounting bracket assembly. Please note that some of the 2001-2004 models will also have the square mount if the mount has recently been replaced under warranty or a new mount was purchased from you Volvo dealer. Recently, the round style was superseded to the square style by Volvo

NOTE: These polyurethane bushings are firmer than the stock rubber parts they replace and WILL transmit additional vibration. Especially if the motor mounts and or transmission mounts are worn. When you replace the worn out rubber mount, much of the load is now supported by the new stiffer bushing and this can often lead to unwanted vibration, especially at idle on models equipped with automatic transmissions. It’s important to make sure that your other mounts are in good condition. 

Additionally, if you're replacing multiple upgraded polyurethane mounts this condition can be amplified. Firming up the engine mounting is a trade-off - better performance may come at the price of increased vibration and engine feel through the cabin.

*Many cars have been retrofitted with the later square style bushing by Volvo under warranty. Please inspect your car before purchasing to ensure correct fit.

Product Status & Availability

Adding items to your shopping cart and placing an order is only an intent to purchase. We will not charge you for anything until we can ship the products you ordered (if paying by credit card. PayPal is a prepayment method.) We will do everything we can to fill your order in a timely manner. You can cancel your order at any time prior to shipment.

This stocked product is available to order plus backorders are allowed.

We consider this a stocked product and normally try to keep some in stock. If you need more than we have available, feel free to order it and we will get it for you. It typically takes 16 days for additional stock to arrive and be packed for shipping.

Units available to ship:10+

Product Images

112517 Polyurethane Upper Engine Stabilizer Mount & Bracket 30680770
112517 Polyurethane Upper Engine Stabilizer Mount & Bracket 30680770
112517 Polyurethane Upper Engine Stabilizer Mount & Bracket 30680770
112517 Polyurethane Upper Engine Stabilizer Mount & Bracket 30680770
112517 Polyurethane Upper Engine Stabilizer Mount & Bracket 30680770
112517 Polyurethane Upper Engine Stabilizer Mount & Bracket 30680770
112517 Customer Submitted Photo
112517 Customer Submitted Photo
112517 Customer Submitted Photo
112517 CUSTOMER SUBMITTED PHOTO
112517 CUSTOMER SUBMITTED PHOTO

This is the product you are currently viewing

Polyurethane Upper Engine Stabilizer Mount & Bracket 
ITEM DESCRIPTIONPolyurethane Upper Engine Stabilizer Mount & Bracket
IPD ITEM NUMBER112517
PRICE$64.95 PER KIT
CLASSIFICATIONPERFORMANCE PARTS
QUALITY LEVELBEST (BETTER THAN OE)
BRANDIPD
MATERIALPOLYURETHANE
UNITS PER CAR1
WARRANTYONE YEAR PARTS WARRANTY

These are Similar or Comparable Products

111086 Polyurethane Upper Engine Stabilizer MountThe original rubber engine stabilizer mount has proven to be a weak link that that can fail prematurely and allow the engine to rock and move during acceleration and braking, significantly affecting the handling and performance of the car. 
ITEM DESCRIPTIONPolyurethane Upper Engine Stabilizer Mount
IPD ITEM NUMBER111086
PRICE$29.95 PER KIT
CLASSIFICATIONPERFORMANCE PARTS
QUALITY LEVELBEST (BETTER THAN OE)
BRANDIPD
MATERIALPOLYURETHANE
UNITS PER CAR1
WARRANTYONE YEAR PARTS WARRANTY
115191 Upper Engine Stabilizer Mount 
ITEM DESCRIPTIONUpper Engine Stabilizer Mount
IPD ITEM NUMBER115191
PRICE$43.95 PER EACH
CLASSIFICATIONREPAIR & MAINTENANCE
QUALITY LEVELBETTER (ORIGINAL EQUIPMENT)
BRANDHUTCHINSON
MATERIALRUBBER
UNITS PER CAR1
WARRANTYONE YEAR PARTS WARRANTY
124265 Upper Engine Stabilizer Mount - P2 S60 V70 XC70 S80 XC90 5 Cylinder 
ITEM DESCRIPTIONUpper Engine Stabilizer Mount - P2 S60 V70 XC70 S80 XC90 5 Cylinder
IPD ITEM NUMBER124265
PRICE$19.95 PER EACH
CLASSIFICATIONREPAIR & MAINTENANCE
POSITIONUPPER
QUALITY LEVELGOOD (AFTERMARKET)
BRANDMTC
UNITS PER CAR1
WARRANTYONE YEAR PARTS WARRANTY

mcafee site safe Network Solutions SSL FaceBook YouTube Google Plus Pinterest Instagram Twitter Yelp Foursquare

Local 503.257.7500 / Toll-free 800.444.6473 / Fax 503.257.7596

Monday Through Friday: 8:30 AM to 5:00 PM Pacific Time

11744 NE Ainsworth Circle / Portland OR 97220 USA

PO BOX 20339 / Portland OR 97294 USA