Ball Joint - Right
Aftermarket - VM585 - 274119 - 113591
Product Description
Description
Ball joints and tie rods are key components in your Volvo's front suspension and steering system. Since the late 1960's, the ball joints on most Volvos have been of the lifetime design, i.e. no grease fittings for lubrication.
Under normal conditions they can last for over 100,000 miles. When abused or used in unusually rough road conditions the life span can be greatly reduced. When a ball joint or tie rod begins to wear it will usually increase the amount of effort required to steer the car.
Once wear has started, these parts usually will deteriorate rapidly as the load generated by the suspension and transferred through the ball joints and tie rods is very great. Typically you will begin to notice some looseness in the steering or you may notice that your Volvo has a difficult time holding a straight line down the road.
Although the parts aren't terribly difficult to inspect, you should have a good workshop manual handy for reference. If you suspect you've got a problem in the front end, make a point of inspecting these parts soon.
About Aftermarket
Aftermarket parts are a reasonably priced and good alternative to OE products. We often supply aftermarket products in place of OE parts that are no longer available as well.
Some items will be better than stock or considered an upgrade from the OE design in the aftermarket brand.
Other items will work as a less expensive alternative to stock.
We will not sell a product that we do not believe in, so rest assured you are fine with the aftermarket brand in most applications!
If you have any questions, contact our customer service team to advise on the best aftermarket products for your Volvo.
Technical Tips & Articles
Vehicle Fitment Guide
Similar or Comparable Products
Similar or Comparable Products
Recommended Products
You will probably need some of these products
Shipping Estimate
Product Reviews
Policies, Warranty & FAQ
Available to Order means the item may not be in our warehouse but is readily available from one or more supplier warehouses. After you order it, we will get it for you ASAP.
Products from major brand names are almost always in stock in the manufacturer’s domestic warehouse. These suppliers have good fill rates, but even if they are out of stock, we may be able to source it from a variety of alternative wholesale sources.
We are at the most a week away from all these warehouses, usually much less. Does that mean we will always have your product available within that window? Honestly, we can't promise that but we’ll do everything we can to get your parts to you in a timely manner.