P3 P5/SPA P6/CMA Haldex 5 AOC Pump with fasteners

If your AWD P3, P5, or P6 Volvo has unexpectedly left you stranded in slippery conditions, it's possible your car's AWD needs service.

Non-hybrid modern Volvos (like T4, T5, and T6 trims of the XC40, S60, V60, S90, V90, and XCs and CCs) use a system called Haldex to engage the rear wheels when the front wheels start to slip. 

^{A cutaway diagram of the Active On-Demand Coupling}

This Haldex system relies on a multi-plate clutch in the rear of the car, also called the Active On-Demand Coupling (AOC). When the system detects front wheel spin, valves open and allow pressurized oil to clamp the clutch down, hooking up the rear wheels and getting you moving again.

The system relies on oil pressure as high as 80 bar (1100psi!) to cycle the hydraulic clutch, and just like any system that pumps oil around, regular fluid changes are recommended. For Haldex, we suggest changing the fluid every 50,000 miles

_{A clogged (and failed!) Haldex pump}

If fluid changes are neglected, the Haldex pump filter screen can start to get clogged and the pump has to work harder and harder until it eventually burns out: you'll suddenly get lots of front wheel spin, and when scanned the car will have pump error codes from the DEM, such as DEM-0006.

This kit contains a new pump and fasteners made by BorgWarner, the Original Equipment Supplier for Volvo. If you've got pump-related DEM codes or if you've hooked 12v up to the pump and heard nothing but silence, this is the kit for you!

Potential Product Fitment Issues

On XC40s, fits B5 models after certain chassis numbers. Check both your factory code and the last six digits of your car's VIN before ordering.

• Factory code 19: from chassis number 920511 and up
• Factory codes 22 and 25: from chassis number 925016 and up.