124563 - 4T4 Turbocharger
|IPD ITEM NUMBER||124563|
|Quality Level||Best (better than OE)|
|Units Per Car||1|
- Policies &
If you drive a 2004-2007 R model, you’re a part of an elite group of Volvo enthusiasts. The R model is one of the most advanced performance vehicles, even compared to models offered today. The stock K24 turbocharger offered on the R can leave a lot to be desired when it comes to overall performance delivery. We’ve been testing and tuning the limitation of the R model since it became available in the U.S. market. Working closely with our tuning partner MTE has allowed us to discover the primary performance limitations.
IPD’s 4T4 ball bearing turbocharger for Volvo’s B52X4T engines is the first completely custom manufactured bolt on turbo available. This is a serious turbo for the enthusiast that wants to extract the maximum performance from the factory supplied engine in their car or for the engine build producing up to 500 crank horsepower.
Volvo uses a proprietary design for the exhaust manifold flange and outlet that made it necessary for us to manufacture a custom stainless steel exhaust housing from scratch rather than modifying a component from another car. Volvo also uses a low pressure TCV boost control system that will not work with most waste-gate actuators, requiring us to use our own specific billet actuator.
Our primary goal was to build the best possible solution for performance while allowing the use of intake and exhaust performance components that may have been previously installed by the tuner. Our larger more efficient ball bearing design allows far greater power output, at lower than stage 2 boost levels, without sacrificing mid-range boost delivery. This turbo represents the perfect synthesis of OE grade manufacturing processes and aftermarket performance improvement while maintaining factory fit. We feel this is the ultimate answer for the discerning performance enthusiast.
While this turbo is a bolt in component, it will require the addition of an external bypass valve (like the IPD Boostability components) for more stable boost control. IPD strongly recommends our Bosch 650cc injectors (121145) and proper tuning (like our friends at MTE) to protect your investment. We have complete kits available for the 2004-07 R models and we can help with components for other 1994-2009 turbo models as well.
For in depth specifics and further information about IPD's 4T4 turbo, turbo kits and all associated components click here.
IPD 4T4 Turbo includes these features:
- 4T4 turbocharger incorporating a 44lb/min billet compressor wheel
- Dual ceramic ball bearing CHRA
- Ceramic coated stainless steel exhaust housing
- IPD billet wategate actuator
- High pressure Aeroquip hose for water lines
- Stainless steel braided oil feed line and hardware
- Metal oil drain tube with o-ring and gasket
- OEM Volvo manifold to turbo metal gasket
IPD’s 4T4 turbocharger and associated components are designed to function in harmony as a kit and have been developed as such. Due to the complexity involved and nature of this product IPD cannot extend any warranty beyond basic 1-year manufacturing and workmanship defects when not used in conjunction with IPD 650cc fuel injectors, IPD bypass valve and IPD/MTC ECU tune. If you choose to install and use IPD’s 4T4 turbocharger with components and/or ECU tune not recommended by IPD, warranty claims will be subject to evaluation, failure due to improper tuning will not be covered.
Additional Technical Information
Product Status & Availability
Adding items to your shopping cart and placing an order is only an intent to purchase. We will not charge you for anything until we can ship the products you ordered (if paying by credit card. PayPal is a prepayment method.) We will do everything we can to fill your order in a timely manner. You can cancel your order at any time prior to shipment.
This non-stocked product is available to order plus backorders are allowed.
This is considered a non-stocked product. We usually only order it from the supplier when there is a customer backorder for it.
This item is not currently in stock but placing a backorder now will let us know that you want it. We will get it for you as soon as we can.
It typically takes us 15 days or less to get stock here and ready for shipping.
This item is an assembled kit. It consists of multiple component items or processes that are pre-kitted or assembled by our employees and becomes a single product. In some cases, this kit could have multiple stages or processes such as machine work, powder coating or laser marking which can sometimes cause unpredictable delays in availability.
|Units available to ship:||Zero|