The Volvo Parts
Specialists
The Volvo Parts Specialists Since 1963 The Volvo Parts, Accessories & Performance Specialists Since 1963
logo
The Volvo Parts, Accessories &
Performance Specialists Since 1963

Future Cars Blog: Volvo Experimental Safety Car

Saturday, January 18, 2020 - Megan Russell

"Volvo Experimental Safety Car from 1972: A concept car long before its time in the field of car safety research" 

Two years prior to the introduction of the 240, Volvo built a number of VESCs to test both the design and a number of safety systems. With features such as crumple zones, rollover protection, a ‘disappearing’ steering wheel, ABS, automatic seat belts, airbags, pop-up head restraints, interior trim and reversing camera, the VESC attracted enormous attention.

- Volvo Cars

"The VESC (Volvo Experimental Safety Car) was unveiled at the Geneva Motor Show 1972 – a forerunner in the field of car safety and equipped with a range of technical solutions that subsequently became a natural part of Volvo’s leadership in this important area.

From the viewpoint of appearance too, VESC hinted at the design language of the forthcoming Volvo 240, introduced in 1974 and later became Volvo’s longest-lasting model ever, with almost 2.9 million cars produced during its 19 year production run. The Volvo 240 also became the reference car for the American road safety administration NHTSA.

  • A series of concept carsThe VESC was equipped with a range of what at the time could only be regarded as highly innovative safety solutions.The VESC project had the following features, among many others:
  • Safety belts of semi-passive type, that is to say the front seat belts were automatically strapped around the seat occupants when the car engine was started.
  • Airbags for both front and rear seat occupants.
  • Airbag as head restraint on the rear seat hatshelf.
  • Concealed front seat head restraints that automatically deployed in a collision.
  • A “disappearing steering wheel”. In a frontal collision, the steering wheel was pulled forward 150 mm, away from the driver.
  • Headlamp washers and wipers.
  • Rear windscreen washers and wiper.
  • Extra-sturdy body. The front and rear sections were designed for optimum impact absorption. The passenger compartment was also protected by a robust network of beams in the roof, including an integrated roll-over cage. The body sides were reinforced with tubes to provide extra protection in a side collision.
  • The rear engine mounts were designed so the engine would be forced to slide down under the car in a frontal impact.
  • The extremely pronounced bumpers gave the car a characteristic profile. They protected the body against panel damage in low-speed impacts at up to 16 km/h.
  • Anti-locking brakes.
  • Automatic ride-height control.
  • Automatic fuel supply cut-off.
  • Acoustic reversing warning.

 

 

Innovative in terms of environmental consideration too
The VESC also served as mobile test-benches for other technical solutions such as a modified front suspension system. What is more, the four-cylinder fuel-injected B20 engine was further developed to meet the 1974 US exhaust emission requirements. With what is today known as EGR (Exhaust Gas Recirculation) and a catalytic reactor, the VESC concept can be regarded as a forerunner of Volvo’s subsequent catalytic converter with Lambda sensor, which was a sensational innovation at its introduction in 1976.

 

Before its time
The VESC project clearly demonstrated Volvo’s determination to continue setting the agenda in the field of car safety. Most of the technical solutions that were integrated into the VESC met in-house Volvo standards that were far stricter than contemporary legislation. Many of the solutions also found their way into the Volvo 240 – and even more have been gradually introduced into subsequent Volvo models."

- Volvo Cars Press Release

Contribute to the Community!

We're looking for comments that are interesting, helpful, substantial and informative.

Comment on this article

IPD is the Volvo Parts, Accessories and Performance Specialists Since 1963.

We offer a wide variety of high quality replacement, maintenance and restoration car parts plus our own line of heavy duty and performance products. Our custom built online parts catalog features Genuine, OE, OES, OEM, Aftermarket and IPD branded replacement auto parts.

Combine our unmatched 50+ year reputation with our outstanding customer service team and you can be confident we'll be here to serve your Volvo needs long in to the future. Not many others can match our knowledge and dedication to providing the very best customer service in the market. We have a physical location, live customer service agents you can call and extensive inventory so we can ship products to you quickly. Our customer and vehicle first approach means that your experience is our first priority. We have truly hassle-free returns and provide do-it-yourself (DIY) guides and videos for many of our products.

Local: 503.257.7500 | Toll-free: 800.444.6473

Monday-Friday | 8:30 AM to 5:00 PM PST