header blank
Our web server is currently experiencing an unusually high traffic load which may adversely affect your browsing experience.

10075 Turn Signal Lens Assembly Replacement - 850 & 70 Series

Created on 2011-03-09 by IPD Staff

Replacing the front turn signal bulb or the front turn signal lens assembly is easier than you think.

Open the hood and look directly behind the light. On the 850 models you will see a spring with a finger ring. Move the wire spring off the body and the lens assembly, it will now pull out toward the front of the car.

On the 70 series behind the lens assembly, you will find a tab, which the flat bladed screwdriver will easily depress. Once depressed the lens assembly will slide forward and out.

To reinstall always check the locating pin on the side and gently push into place until you can refasten the spring on the 850 or until you hear a click on the 70 series.


mcafee site safe Security Metrics Credit Card Safe Network Solutions SSL FaceBook YouTube Google Plus Pinterest Instagram Twitter

Local 503.257.7500 / Toll-free 800.444.6473 / Fax 503.257.7596

Monday Through Friday: 8:30 AM to 5:00 PM Pacific Time

11744 NE Ainsworth Circle / Portland OR 97220 USA

PO BOX 20339 / Portland OR 97294 USA