114938 - VX Street Performance Camshaft for Non-Turbos

Product Description

IPD's variant of the VX camshaft is back!

Excerpt from "The Volvo Performance Handbook" by Paul Grimshaw:

"An excellent modern example of a high-performance camshaft is Volvo's own "VX" design. Featuring moderate-to-high lift, fair overlap, and good duration the VX cam has been used as a direct replacement for the B230F's anaemic "M" camshaft. This cam/engine combination was marketed in Europe from 1992-1993 as the B230FX and featured a strong (136 ft-lb) flat torque curve from 2900 to 5400 RPM -- improving engine performance dramatically. Peak horsepower rose from 114 BHP to 136 BHP -- a 19% improvement!

What the numbers or power curves cannot accurately communicate is the willingness with which the VX-equipped B230F responds. The reaction to throttle input is far quicker, with none of the roughness over 4000 RPM that the "M" grind typically exhibits. having personally used the cam for some time, I can attest to little change in fuel economy or idle stability."

The IPD VX cam is based on Volvo's original VX camshaft that appeared in the European B230FX engine.

While this camshaft can be used with good results in both turbo and non-turbo applications, we recommend the VX camshaft for non-turbo models and recommend our 0256 Turbo camshaft for turbo models.

We recommend using the VX in Bosch LH-Jetronic or Regina fuel injected models.  It can also be used in 240 models with K-Jetronic fuel injections, but will idle rough (and may adversely affect idle emissions.)

To provide you with the longest camshaft life, these are new Parkerized chill cast iron camshafts. We don't sell re-ground camshafts because the grinding process usually removes the outer hardened material and greatly reduces the life of the camshaft and valve shims, not to mention requires you to adjust valves more frequently.

When installing this camshaft, you will need a cam cover gasket and will probably need to adjust the valves. Also a great time to install a new timing belt and seals. 

Specifications:

Lift Intake: 11.37mm
Lift Exhaust: 10.65mm
Intake duration: 245.4°
Exhaust duration: 236.2°
Overlap degrees: 13.8°
 

Disclaimer: Performance products sold by IPD have not been tested or approved by any international, federal or local governing agency for street use, thus are designated for non-road or race track use only. Although every effort is made to maintain or improve upon the emissions standards and safety of your Volvo, some of our products may not be legal for street use in your region. IPD makes no claim of fitness or certification for such use and leave it up to you to research the laws of your region.

Technical Tips & Articles

• 10078 - Engine Performance Upgrades for "Red Block" Volvos

Product Related Files & Downloads

• OHC CAM INSTALL.PDF (133KB)

Product Status & Availability

Adding items to your shopping cart and placing an order is only an intent to purchase. We will not charge you for anything until we can ship the products you ordered. We will do everything we can to fill your order in a timely manner. You can cancel your order at any time prior to shipment.

This stocked product is available to order plus backorders are allowed.

We consider this a stocked product and normally try to keep some in stock. If you need more than we have available, feel free to order it and we will get it for you. It typically takes 120 days for additional stock to arrive and be packed for shipping.

Additional Product Images