112394 - Rear Camber Bushing Kit

Product Description

IPD’s rear camber bushing allows you to adjust for excessive rear camber that can cause premature tire wear and poor braking performance.

Typically excessive negative rear camber occurs when lowering a vehicle via sport springs although, some stock vehicles can also require adjustment. Since there is no factory provision for rear camber adjustment IPD has developed an eccentric offset bushing that provides up to 1.5 degree of camber adjustment (negative or positive) to help correct your alignment problems.

The ipd rear camber bushings can provide up to 1.5 degrees of adjustment to correct the common problem of excessive negative camber. The bushing must be pressed into the chassis in a particular orientation to realize the benefits of the design. Installation should be performed by an experience technician who is familiar with this process and the appropriate tools required to complete it.

Not only will this alleviate poor tire wear it can also restore lost braking performance by increasing the contact surface of the tire to the road. Be sure to have your vehicle aligned before installing these bushings so that you can have a baseline to adjust from. If it’s been more than 6 months since your alignment angles were checked, consider having them re-aligned.

IPD strongly recommends professional installation to ensure the proper amount of adjustment is obtained.

Product Related Files & Downloads

• PI-358 REAR CAMBER BUSHING INSTALL GUIDE.PDF (2471KB)

Product Status & Availability

Adding items to your shopping cart and placing an order is only an intent to purchase. We will not charge you for anything until we can ship the products you ordered. We will do everything we can to fill your order in a timely manner. You can cancel your order at any time prior to shipment.

This stocked product is available to order plus backorders are allowed.

This item is an assembled kit. It consists of multiple component items or processes that are pre-kitted or assembled by our employees and becomes a single product. In some cases, this kit could have multiple stages or processes such as machine work, powder coating or laser marking which can sometimes cause unpredictable delays in availability.

Additional Product Images