111186 - Scan Gauge
|IPD ITEM NUMBER||111186|
|WARRANTY||ONE YEAR PARTS WARRANTY|
|CROSS REFERENCE||T1002, 788006004115|
This is one feature-packed tool that functions as a fully operational scanner to read and reset standard OBD IIdiagnostic trouble codes for the engine management systems(DTC's), comprehensive gauge functions (with no hard wiring) and an enhanced trip computer. All by simply plugging it into the OBDII port in your 1996 or newer Volvo. (and just about any other 1996 or newer vehicle) The interface is very intuitive and we had it working in minutes on our test car without reading the instructions! Unit is approximately 5" X 3" x 2" with an 8' long cord.
Please note that only standard OBD II codes for the engine management system are supported. Proprietary Vehicle manufacturer codes / systems such as for the ABS, Climate Control, Transmission,SRS, Suspension, etcarenot supported.Tools to access the manufacturer specific codes start at $3000+.
The ScanGaugeII provides real time MPG just like the factory options. More importantly, it also shows averages. It shows fuel use and economy for each trip you make, for all the trips in days driving, for all of the previous day's trips and over the entire tank of fuel. Each time you start driving after the engine has been off for at least three minutes, the "CURRENT" trip reset to 0 MPG and starts increasing as you start driving. You will see the MPG value go up and down as you drive.
Automatically tracks four sets of trip data - Each with 11 individually stored parameters.
- Maximum Speed
- Average Speed
- Maximum Coolant Temperature
- Maximum RPM
- Driving Time
- Driving Distance
- Fuel Used
- Trip Fuel Economy
- Distance to Empty
- Time to Empty
- Fuel to Empty
Display 4 gauges at a time from the 12 built-in digital gauges. The information is presented in Real-time!
- Fuel Economy
- Fuel Rate
- Battery Voltage
- Coolant Temperature
- Intake Air Temperature
- Engine Speed (RPM)
- Vehicle speed (MPH)
- Manifold Pressure (not available on some vehicles)
- Engine Load
- Throttle Position
- Ignition Timing
- Open/Closed Loop
ScanGauge II allows you to troubleshoot your own car, read error codes, and the conditions present when the error occurred. You can also turn off the "Check Engine" light and avoid those costly trips to the mechanic.
- Reads Engine Management Trouble Codes Please note that only standard OBD II codes for the engine management system are supported. Proprietary Vehicle manufacturer codes / systems such as for the ABS, Climate Control, Transmission,SRS, Suspension, etcarenot supported.Tools to access the manufacturer specific codes start at $3000+.
- Reads conditions that set the Trouble Code *Clears Trouble Codes *Turns off the "Check Engine" light *Tells you when vehicle is "Ready" to pass OBDII testing *Make and store up to 10 rewritable special codes to send to the vehicle computer Visit www.scangauge.com for more info including FAQs, user manual and nice detailed color photos.
Technical Tips & Articles
Product Status & Availability
Adding items to your shopping cart and placing an order is only an intent to purchase. We will not charge you for anything until we can ship the products you ordered (if paying by credit card. PayPal is a prepayment method.) We will do everything we can to fill your order in a timely manner. You can cancel your order at any time prior to shipment.
This stocked product is available to order plus backorders are allowed.
We consider this a stocked product and normally try to keep some in stock. If you need more than we have available, feel free to order it and we will get it for you. It typically takes 10 days for additional stock to arrive and be packed for shipping.
|Units available to ship:||3|