114529 - PCV Breather System Kit 2002 S80 T6
|IPD ITEM NUMBER||114529|
|CLASSIFICATION||REPAIR & MAINTENANCE|
|QUALITY LEVEL||BETTER (ORIGINAL EQUIPMENT)|
|UNITS PER CAR||1|
|WARRANTY||ONE YEAR PARTS WARRANTY|
|CROSS REFERENCE||2E8721, 9497454, 30650822, 8631999, 30713120|
Properly servicing the flame trap / crank case ventilation system generally means replacing all the system components and can be fairly costly as labor as the intake manifold must be removed. Generally speaking the flame trap system components need to be replaced about every 100K or so depending on the quality of oil used, oil change intervals and driving conditions. The plastic tubing and fittings get extremely brittle with age and also becomes restricted internally due to oil deposits and sludge forming inside the tubing. The restricted breather flow results in excessive crank case pressure, which in turn begins to force oil past seals. If left unchecked, seal failure can occur which in extreme cases could result in rapid loss of oil pressure and catastrophic engine failure.
IPD PCV Kits consist of all OE Volvo grade (or better) components.
Technical Tips & Articles
Product Status & Availability
Adding items to your shopping cart and placing an order is only an intent to purchase. We will not charge you for anything until we can ship the products you ordered (if paying by credit card. PayPal is a prepayment method.) We will do everything we can to fill your order in a timely manner. You can cancel your order at any time prior to shipment.
This non-stocked product is available to order plus backorders are allowed.
This is considered a non-stocked product. We usually only order it from the supplier when there is a customer backorder for it.
This item is not currently in stock but placing a backorder now will let us know that you want it. We will get it for you as soon as we can.
It typically takes us 15 days or less to get stock here and ready for shipping.
This item is an assembled kit. It consists of multiple component items or processes that are pre-kitted or assembled by our employees and becomes a single product. In some cases, this kit could have multiple stages or processes such as machine work, powder coating or laser marking which can sometimes cause unpredictable delays in availability.