top_nav_right
right_col_bckgrnd The Volvo Specialists
Basket Summary

Your basket is empty

Product Search

ipdlogo

11744 NE Ainsworth Circle
Portland, OR 97220
Google Maps

503-257-7500
1-800-444-6473

 

AbsoluteB

right_col_bckgrnd
« Previous Page TOC | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | Next Page »
 

Christmas Gift Ideas from ipd - Front Wheel Drive Models
Page 4: Fender Gripper, Scan Gauge II, Torx Bits and Drivers

If you place your order by phone, please provide the customer service representative with promotion code "ES" to apply any sale pricing that may be available through this promotion. This Promotion may include products that are not discounted below our normal competitive pricing structure.

Promotion effective from November 2, 2009 through December 31, 2009

Busted Knuckle Garage Fender Gripper/Protector
The Fender Gripper clings to painted material and holds tools at a near 90 degree angle, impervious to motor oil, coolant, lacquer thinner, brake fluid, etc. Made from strong PVC material reinforced with nylon mesh, soft and cushioned for protection with a non-slip finish the Fender Gripper is completely washable. An ounce of prevention is better than a pound of touch up paint. Dimensions: 22” X 34”.
Fender gripper ES-T53Reg. $24.95  Each

Scan Gauge II
This is one feature-packed tool that functions as a fully operational scanner, comprehensive gauge functions (with no hard wiring) and an enhanced trip computer. All by simply plugging it into the OBDII port in your 1996 or newer Volvo. (and just about any other 1996 or newer vehicle) The interface is very intuitive and we had it working in minutes on our test car without reading the instructions! Unit is approximately 5" X 3" x 2" with an 8Í long cord.

The ScanGaugeII provides real time MPG just like the factory options. More importantly, it also shows averages. It shows fuel use and economy for each trip you make, for all the trips in days driving, for all of the previous day's trips and over the entire tank of fuel. Each time you start driving after the engine has been off for at least three minutes, the "CURRENT" trip reset to 0 MPG and starts increasing as you start driving. You will see the MPG value go up and down as you drive.

Scan gauge 1996 and up ES-T1002Reg. $169.95  Each

1/4” and 3/8” Drive Torx Bit Set
Torx fasteners are rapidly replacing Phillips head and metric hex head fasteners on the newer Volvo models. You’ll find the common T-25 and T-30 sizes used on 700 and 900 series models as well as a few of the other common sizes, which can usually be handled with the Torx drivers included in the factory tool kit. Finding a good quality set of Torx bits can be a challenge.

This set, made in the USA, is made of high strength hardened alloy steel for the professional mechanic (lifetime warranty) and includes 1/4” drive T-10,T15,T-20,T-25, T-27, T-30 and 3/8” drive T-40, T-45, and T-50 bits. The dual drive sizes may seem unusual at first, but after using them for awhile, it really makes good sense. The 1/4” drive on the smaller bits allows them to be used in tight fit areas where a larger socket body and 3/8” ratchet driver wouldn’t fit. The 3/8” drive on the larger bits insures you’ll be able to break loose the larger sized fasteners that a 1/4” drive couldn’t handle.

9 Piece torx bit set ES-T1050Reg. $22.95  Each

External Torx
If your 850 and later model vehicle has an ABS/Tracs light on and the module is the culprit (diagnostic trouble codes123-124-213-214-313-314-323-324) you’ll need our E5 external torx to remove the control unit. The four fasteners are accessed from the bottom of the unit and require a bit of care to ensure no damage occurs. Don’t try to use a socket that is ‘close’ or you may just have two problems on your hands! Better yet, get our 11 piece external torx set, containing E4 through E20 and tackle those front wheel bearing fasteners too!

Individual E5 external torx CTAES-T9580Reg. $4.95  Each
11-piece external torx set CTAES-T9640Reg. $29.99  Each

Folding Torx Bit Set
Torx bits have found their way into Volvo since the late model 240 series and are ever increasing in the newest generations. Our handy tool includes the most commonly used torx sizes (T9 - T40) and folds up tight to fit in a pocket or keep in the glove box. An aluminum body for light-weight strength and a rust proof finish, will keep this tool around for years to come.

Folding torx bit set (T9-T40) CTAES-T1016Reg. $10.95  Each

Torx 25 and 30 Drivers
From the 850 up to the XC90 torx screws are showing up more and more. From the engine compartment to the interior and from panels to covers they fasten countless pieces in the vehicle. Our torx drivers feature a rubberized ergo soft handle for maximum grip and a hex shank for applying a wrench when arm strength alone won’t break it free. Great in the glove box or the tool box!

T25 and T30 will cover about 90% of the most common jobs encountered by do-it-yourselfers!

Torx 25 driver ES-T1008Reg. $4.95  Each
Torx 30 driver ES-T1009Reg. $4.95  Each

Promotion effective from November 2, 2009 through December 31, 2009

 
« Previous Page TOC | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | Next Page »
footer_right