If you place your order by phone, please provide the customer service representative with promotion code "MN" to apply any sale pricing that may be available through this promotion. This Promotion may include products that are not discounted below our normal competitive pricing structure.
Promotion effective from May 8, 2009 through July 3, 2009
 Great Light
Our cordless rechargeable shop light is on the top of our favorite tech’s wish list. With 36 super bright LEDs and reflective back plate, this is the light you’ve been looking for. Comes with both a 12v cigar lighter adapter and wall adapter so you can have the brightest light anywhere you need it. Powerful magnet on back and hook on top allow you to place this light in even the tighest spots. 3 hour run time means you won’t have to stop and recharge right in the middle of your work. Complete recharge time in 3 to 4 hours.
|
 360° Ratchet
New flexible head ratchet allows for access in tight places without sacrificing leverage. Fine tooth gears allow for small adjustments to get just the right angle, or release the head and spin it around for quickly running down threads. Features 3/8 drive ratchet with 360 degree swivel head and extended handle for extra torque.
| 360° 3/8” ratchet | | MN-T1013 | Reg. $34.95 | | Each |
|
 Magnetic Pickup Tool with LED Light
Flexible magnetic LED pickup tool is great for retrieving those dropped fasteners. Strong 4 lb. magnet and super bright LED provides the muscle and illumination to see into dark recessed areas to find fasteners that have slipped between fingers. Features non-slip rubberized handle, twist on/off switch for LED, and super flexible neck. 24 inch overall length.
| Magnetic pickup tool with LED light | | MN-T1010 | Reg. $9.95 | | Each |
|
 Extra Long Needle Nose Pliers
Ever wish you had an extra joint in your arm between your wrist and elbow? That would make jobs like installing vacuum lines and heater hose clamps much easier. Well until you get that extra joint installed, we’ve got the next best thing. These extra long (11”) pliers allow you access to the depths of your engine compartment. We couldn’t believe how easy it makes some jobs go that we used to consider “nightmare jobs”. The straight versions will work in most applications, but we have found the offset ones to be particularly useful.
| 11” straight needle nose pliers | | MN-T1047 | Reg. $9.95 | | Each | | 11” 45 deg. angled needle nose pliers | | MN-T1045 | Reg. $9.95 | | Each |
|
 Busted Knuckle Garage Fender Gripper
After years in the shop, we have come to know a good fender cover when we see one. The Fender Gripper clings to painted material and holds tools at a near 90 degree angle, impervious to motor oil, coolant, lacquer thinner, brake fluid, etc. Made from strong PVC material reinforced with nylon mesh, soft and cushioned for protection with a non-slip finish the Fender Gripper is completely washable. An ounce of prevention is better than a pound of touch up paint. Dimensions: 22” L X 34” W.
| Fender gripper | | MN-T53 | Reg. $24.95 | | Each |
|
Promotion effective from May 8, 2009 through July 3, 2009
