March 2008 Newsletter for Front Wheel Drive Models

Lubromoly was founded in the mid 1950s in Germany. Their extensive research and development was specifically aimed at the automotive engine to improve its longevity. Later as engines were designed to run as lean as possible, the need for fuel additives increased and Lubromoly was there developing products to solve hesitation and drivability problems. At that time most products were only available at the professional repair shop level. Now the same additives are available for every day use to maintain and keep you engine and fuel system in peak condition. Lubromoly products incorporate the most advanced materials available along with tried and true features of the past.

Jectron Fuel Injection Cleaner

Cleans the fuel distributor and injectors to improve starting, idle, throttle response and mileage. Due to improved injection pattern and more precise control of the injected fuel quality, the engine burns cleaner and uses less fuel. At the same time, drivability is improved: easier starting, less stalling, smoother idling, better throttle response, no run-on after the ignition is shut off. Just add a can to a full tank of gas.

Anti-Friction Engine Treatment

When a customer tipped us on this product, we were admittedly skeptical. But after using it in a number of different cars, we thought it was great! It forms a friction and wear reducing moly fi lm on all internal moving surfaces of the engine. Engines can actually run smoother, quieter, cooler, and more reliably, with an extra measure of protection under extreme operating conditions and cold start situations. And it mixes with all motor oils, even modern synthetics. It really does quiet down the engine and make it run smoother. Simply add one can to your engine each time you do an oil change for best results.

Fuel System Cleaner

Formulated for professional use to restore and keep the fuel system in good condition. Reduces the CO and HC emissions and prepares the vehicle for a smog test. Successfully tested to international CEC standards. Can signifi cantly improve: cold-start diffi culties, rough idling, poor throttle response, loss of performance, lean surging, high exhaust emissions. Add a 500ml can to a full tank of gas to renew the fuel system.

Ventil Sauber (Valve Cleaner)

This gasoline additive removes carbon deposits from valves and combustion chambers, especially important in the mid-1980s LH injection cars that had a high build up of carbon deposits on and around the valves. It also helps protect the fuel system against corrosion and icing. Ventil Sauber is suited for both injected and carbureted cars, and is safe for catalytic converters and turbocharged engines. Add a 300ml can to your full gas tank.

Fuel System Cleaner

Formulated for professional use to restore and keep the fuel system in good condition. Reduces the CO and HC emissions and prepares the vehicle for a smog test. Successfully tested to international CEC standards. Can signifi cantly improve: cold-start diffi culties, rough idling, poor throttle response, loss of performance, lean surging, high exhaust emissions. Add a 500ml can to a full tank of gas to renew the fuel system.

Repeat at every other oil change for best results and trouble-free performance.