WANTED: P1800 Rear Torque Rod (or axle pull rod). I'm having trouble sourcing them...any tips?
22/1800 rust free repair panels - many pre-cut rockers, some quarter panels and floors available Health issues dictate that I liquidate - Lots of steering/suspension parts available too - please send your wish-list, and I will respond within 24 hours. If you want a shipping estimate - include your city and zip code. M. O. and PayPal accepted. Parts in Tucson AZ - Help my clean out the yard.
A pair of door handles and trunk lock with matching key for 1800. Fits 1967 and newer. Locks work as they're supposed to. $75.00 plus $12.50 shipping to the lower 48 states. I take PayPal or money orders drawn on a U.S. bank. If interested call Roy at (520) 260-4019. No text messages please. Thank you for your business.
Cleaning out surplus parts. 123GT reclining seats B18 with weber carb, Runs well was pulled from wagon and replace with HP B20. Rear end out of 123 GT in good condition. 122 HOOD and Trunk lids M40 4 speed transmission Rims stock off 123GT Front end with hubs etc Various other parts. Parts are in Edmonton, Alberta, Canada Contact for pricing. email@example.com
hello guys, I came across a 122 driver side fender. It is steel, and never been painted, primed, or prepped -- it is the real deal may be a NOS part I know what I want for it but make me offer! Geoff 912-306-0191
Looking for a IPD 1.0 front sway bar for the 1800ES. Shoot me an e-mail with you asking price with shipping to 29651. Thanks. Jeffrey. zangerzone @ aol dot com
b18 and 4spd standard trans for sale 65K miles came out of a 65 pv 544 the guy was the original owner and took it out when he restored the car to put in a v8 i bought the engine on a whim a while back and now i need it gone engine turns free and the trans as well MAKE OFFER i will ship in the US you pay for shiping firstname.lastname@example.org I am located in the Chicago area but i will shop for the right price
Hello everyone, I'm looking to buy a longe engine block for a 122s. i'm in northern CA. Sonoma Ca. please let me know how much and when it last ran. running condition only no rod knocking. email@example.com
for sale is a complete set of 1970-71 reconditioned clover leaf style wheels.300$ for set. not including shipping.I had these redone and look great but I decided I didn't like the stock look. thanks. andrewkmccord at yahoo dot com.IMG_1461.JPG IMG_1459.JPG IMG_1463.JPG IMG_1460.JPG
for sale is a complete set of 1970-71 reconditioned clover leaf style wheels.300$ for set. not including shipping.I had these redone and look great but I decided I didn't like the stock look. thanks. andrewkmccord at yahoo dot com.
Fiberglass front fenders($150/pr + shipping), More photos available. kevydavisatgmaildotcom, Zip Code eight one 4 zero one.
122/1800/544/140 Vintage Volvo 15" trim rings. A few dents and small dings but all in all pretty good shape. $35+shipping from 30102
122/1800/544/140 Vintage Volvo "V" Center caps. In good shape. $50+shipping from 30102
NOS Volvo SU Air filters. $80+ shipping from 30102
122 Single circuit brake master cylinder NEW never been used. $45.00+ shipping from 30102
122 front brake rotors. These are used but they are in good turnable shape. They came off a 67 $100.00+ shipping from 30102
122/1800 New Partial rear bushing kit in rubber. It's mostly there just a few of them missing. $45+ shipping from 30102
1800E/ES/S Dual circuit brake booster. Used,but in good working order. Came off a 70 1800E. $100.00 + shipping from 30102
SEAT FRAMES WITH HEADRESTS 122, 220, or 123gt (maybe) I was very close to finishing a rebuild restoration of a set of black seats with headrests. I HAD the foam (sold it on eBay) and everything ready but the vinyl. Then I find some guy with a nice red 68 car that he was junking.... I bought the seats that were in great shape. That put a halt to the seat project I started. Here is what I have for sale, and I will add some photos for this in a week or so. Frames- the lower frames do not have rails. They were bead blasted and powder coated in gloss black- looking just like the original factory, but now more durable- you will see in the photos that they are beautiful. I have the elastic clips for the strapping, but of course no (good) straps (originals worn out). I believe I have the short pieces of original black vinyl for the lower portion of the frame, but I was planning to replace that too- let's not count on those. The upper frames- These were originally raw metal (factory) but I blasted the surface rust off. I then painted the uppers with spray (black) epoxy (they get covered). There is also that piece of decorative hardware at the shaft hinge (both sides-4), the boomerang shape, that always gets a beating from seat belts. It was bead blasted and powder coated (again, gloss black, like the factory), so they will be tougher than stock finish, but look like stock. Head rests, with the tube inserts, are black vinyl and in VERY good shape, but not 100%. I think I would give them a 99 or a 98%, but nothing at all to be ashamed of. They are not brand new, like the rest of the seats were going to be, had I finished. Still, it would be hard to notice something wrong, if there is. Everything should be there to put it all together. $250 and the buyer pays for shipping. Ideally, you are close to the east coast- for acquisition.
Type M40G Trans. & Bellhousing - $75, (will not ship). Steering Box - $75. Hood Latch - $20. Seat Belt "Toaster" - $45. Door Handles - NICE, $75 firm. Timing Cover - $20. Original Rear Window - $40, (will not ship). Mudflap Brackets - $15. Speedometer Cable - $20. Rear Turn Signal Housings - $15. Cowl Vent Grille - $40. Water Overflow Bottle - $25. Rear View Mirror & Bracket - $15. Interior Windshield Trim - $25. Rear Ashtrays - $10. Dash Ashtray - $15. Emergency Brake Cover - $15. Door Latch Mechanisms - $30. Gear Shift & Knob - $35. Water Pump & Pipe - $25. Fuel Pump - $20. Oil Pump - $15. Oil Pan - $25. Fan Blade - $10. Valve Covers - $25 each, choice of 3. Carb Heat Shield - $10. Heater Box & Core - $30. Floor Rear Heat Vent - $20. Gas Tank - $40, (will not ship). Trunk Lid with latch/key - $35, (will not ship). More 122 parts, lots of photos, offers welcome. Scott.
B18 Engine Block. Blasted and Very Clean. Never machined. Ready for YOUR rebuild project. $100. E-mail with a phone number if interested. Thank You.
B18 or B20 Valve Cover with Breather Cap. Pretty decent shape. I'm not going to need them. Both for only $75. E-mail with a phone number if interested. Thank You.
Oil Cooler. Perfect Condition. You might want to seek advice from a Vintage Volvo EXPERT on this one. All I know is that it is an OEM part for P1800 and possibly others. $100. E-mail with phone number if interested. Thank You.
For sale 1800 Seat Rails - complete with all mounting hardware and operate smoothly. Will fit P and S cars, not sure about E and ES. $50.00 plus $17.50 shipping to the lower 48 states. I take PayPal and money orders drawn on U.S. banks. If interested call Roy at (520) 260-4019. No texts or e-mails please. Thank you.
B20 short block from 1970 142S, had compression of 155 across board before head was pulled-$275, 122 hood- $135, very good cond front nose- great shape- $325, NOS 122 nose- $500 NOS 122 fenders- $500 ea. NOS 210 lower sheet metal repair panels- rockers, wheel arches, corners lt, floor, NOS rear 122 wagon and 4 door rear door panels in red and tan- $45 ea., NOS 122 2 door tan 1965 door panels- $200/pr. Misc 1800 and 122 trim, NOS stainless 122 rear exhaust pipes- sedans, 1800 1964 egg crate grill- $485.00 etc, NOS 1800 dash caps- top & lower- $165.00/PR, 1961-1964 Bull horn bumpers- $55 each end, wrap around rear- $55.00 ea end.122 uncut dash- $75, Dual port B20 B18 exhaust manifolds- $65.00 ea, 122 jacks- $45.00 ea,.etc.. Prefer local pick up on most of these items in Wash/Baltimore area. firstname.lastname@example.org
Looking for dash controls for a 59 444, am restoring a 1959 volvo pickup, one of approx. 76 made. It currently has a B18 from a 63. Also looking for wing mirrors, the defroster flaps, and the glove box button. Has original dash cluster. Just need the switches. Email email@example.com or feel free to call 909-680-8471. Harrison from SoCal. Thanks IPD.
Overdrive Tranny SOLD// Short Shifter option (from 1800) 75.00 // Underdash AC Unit. Clean-up, re- foamed, ready for an install. R-12 fittings still. 250.00, ac unit comes with double pully, condensor, and some hoses. Ryan 80(5) 801-Zero21(6) or email....slogardening (AT) G mail Dot COM Location: Central Coast, California
I still need a heater fan motor for a 65 1800s......send a picture please. ships to texas
wanted - appropriate stereo for '71 (in-op is fine, as I will install underdash modern stereo)