
11744 NE Ainsworth Circle Portland, OR 97220
Google Maps
503-257-7500 1-800-444-6473

|
 |
Volvo S70/V70 1998-2000 » Radiator Hoses
 In the heat of the summer, imagine what your cars cooling system must endure to prevent engine meltdown. In the toughest of times, it is imperative that all the protective features of the cooling system are operating at peak performance. As your car ages and the miles click by, your cooling system will require some preventive maintenance. Any Volvo engine allowed to overheat is may succumb to extensive damage if not caught in time.
IPD recommends that you check the coolant level and quality of the coolant regularly. When it comes time to flush your coolant, it is recommended to replace the thermostat. Thermostats have been known to and stick, causing overheating and poor running conditions. If your temperature gauge fluctuates in traffic, listen to make sure that the auxiliary cooling fan is running. If you cannot hear the fan, be sure to check the fan itself for a burned out motor. Occasionally, the relay to the cooling fan can fail eliminating power to the fan. Water pumps are not prone to failure, but eventually they will require replacement. Consider replacing it when changing the timing belt as a preventive measure as the timing belt must be removed during a water pump replacement. Please check fitment listed below to ensure products will fit your specific vehicle. Some products may include or exclude some model years or engine and transmission combinations.
Click here to report errors, pricing problems or missing applications.
30044 Reviewed by Jason V. from SoCal
Great clamps with firm adjustment. No more worm gear recesses digging into the hose. Plus the blue bit looks kinda cool for coolant lines.
May 2008
3545662 Reviewed by matt pollard from moscow ID
the directions are awful! the old original 1998 heater core used 2 oring (one on the IN and one on the OUT), yet, this thing come with 4, plus some hard o-ring yellow things, and then these clips. Huh?? The schematic is 'well' xeroxed, fuzzy and has ZERO directions or instructions or....
i used one o-ring per side after ho-humming for a while and it doesn't appear to leak...
-matt moscow ID
ipd customer service response: ipd does not currently provide instructions for changing the heater core. There are some basic instructions in the heater core package from the manufacturer. 3545662 is a kit that contains all the o-rings and clips to remove the firewall coupler that the heater hoses connect to. The clips aren't needed for the heater core replacement in many cases.
February 2008
To leave your own Review, Drill down on the specific product above.
|