The Volvo Specialists
Basket Summary

Your basket is empty

Product Search

Volvo P1800 » Driveline Mounts, Bearings & Misc.

The most common driveline related probelm with Volvos is acceleration shudder caused by a worn out rubber center mount. If you aren't sure how old the center bearing is, you should replace it when installing the new mount. Volvo recommends replacing the flange bolts every time they are disassembled. Considering their relatively low price, it's cheap insurance.

Please check fitment listed below to ensure products will fit your specific vehicle.
Some products may include or exclude some model years or engine and transmission combinations.

Center Support Bearing
ipd#:7A0107
Fitment:1967-1970 1800 carbureted models (bearing dimensions: 2.5" OD, 1.38" ID) for the 1.75" diameter driveline.
 Larger Image, Installation Info & Product Reviews »
Each: $13.00
QTY
Stock Level Good
Center Support Bearing
ipd#:181252
Fitment:1962-1966 1800 models
 Larger Image, Installation Info & Product Reviews »
Each: $48.58
QTY
Stock Level Good
Center Support Bearing
ipd#:7A0109
Fitment:1970-1973 1800E & ES models (bearing dimensions: 2.5" OD, 1.38" ID) for the 1.75" diameter driveline.
 Larger Image, Installation Info & Product Reviews »
Each: $22.64
QTY
Stock Level Good
Cup Washer for Spring
ipd#:682707
Fitment:1970-1971 1800E (Cup washer prevents coil spring from cutting into Rubber Driveline Mount)
 Larger Image, Installation Info & Product Reviews »
Each: $1.52
QTY
Stock Level Good
Flange Bolts for Driveline
ipd#:273202
Fitment:1962-1970 1800 carbureted models (Set of bolts & nuts)
(11mm bolt head)
 Larger Image, Installation Info & Product Reviews »
Each: $12.14
QTY
Stock Level Good
Flange Bolts for Driveline
ipd#:273977
Fitment:1970-1973 E & ES models (set of 4 bolts & nuts)
(14mm bolt head)
 Larger Image, Installation Info & Product Reviews »
Each: $12.63
QTY
Stock Level Good
Rubber Driveline Grommets
ipd#:658653
Fitment:1962-1966 1800 models (2 required)
Use with 7A0107 bearing.
 Larger Image, Installation Info & Product Reviews »
Each: $5.00
QTY
Stock Level Good
Rubber Driveline Mount
ipd#:675367
Fitment:1967-1970 1800 carbureted models
Use with 7A0107 bearing.
 Larger Image, Installation Info & Product Reviews »
Each: $9.30
QTY
Stock Level Good
Rubber Driveline Mount
ipd#:1221635
Fitment:1970-1971 1800E (for 2" diameter driveline)
 Larger Image, Installation Info & Product Reviews »
Each: $6.50
QTY
Stock Level Good
Rubber Driveline Mount
ipd#:686352
Fitment:1972-1973 1800E & ES models
Use with 7A0107 bearing and 'small' 1 3/4" diameter driveline.
 Larger Image, Installation Info & Product Reviews »
Each: $6.89
QTY
Stock Level Good
Spring for Driveline Mount
ipd#:683537
Fitment:1970-1971 1800E (spring inserts into the bottom of the Driveline Mount)
 Larger Image, Installation Info & Product Reviews »
Each: $2.36
QTY
Stock Level Good

Click here to ask a question, report errors, pricing issues or missing applications.

Customer Product Reviews

There are currently no reviews of this product.

To leave your own Review, Drill down on the specific product above.