Our experience has shown that situations can arise where the factory front camber adjustment is just not sufficient to bring the vehicle's alignment back into spec. Lowering a vehicle can throw camber angles off quite a bit and the need for a camber kit becomes self-evident. Our kit includes nuts and new bolts of a smaller diameter and with an eccentric on one of the bolt head to provide the adjustment. Some light grinding or filing on the strut housing mounting ears allows for enough movement to gain up to 2.0 degrees of camber. Installation is a breeze with the included plastic fitment pin to aid in concentric hole enlargement of the strut mounting ears. Since some vehicles will need a kit for one side only we are selling the kit per side.
Please check fitment listed below to ensure products will fit your specific vehicle. Some products may include or exclude some model years or engine and transmission combinations.
