11744 NE Ainsworth Circle
Portland, OR 97220
Google Maps
503-257-7500
1-800-444-6473
|
 |
Volvo C30 » 7mm Inset Hex Tool
 Replacing the front brake pads or rotors on Front Wheel and All Wheel Drive series cars requires a 7mm hex tool. Most metric hex tool sets do not include this size, so we have sourced an economical solution. Please check fitment listed below to ensure products will fit your specific vehicle.
Some products may include or exclude some model years or engine and transmission combinations. Click here to ask a question, report errors, pricing issues or missing applications.
T80610 Reviewed by SALVATORE SCHEMBRI JR from NEW YORK
Thank God I bought this.... Without this hex tool I wouldn't have been able to change the brake pads & routers on my 2001 Volvo S60. So If you have a 2001 S60, make sure you make this low cost investment which is worth gold!
September 2008
T80610 Reviewed by Matthew from PA
Not needed for my 2005 S40 FWD w/ 300mm rotors.
ipd customer service response: There may be a few rare models that do not use this tool. Please check your car to be sure.
August 2008
T80610 Reviewed by Big Al from DFW
That's because it's for S70/V70 1998-2000, not your 04.
I used it to do mine today, it works perfectly fine and was definitely neccesary to remove the guide pins to remove the pads in the front calipers.
June 2008
T80610 Reviewed by jeff young from pasadena
this tool is not necessary for an 04 s60r. i ordered it after seeing in the description "for front and all wheel drive volvos" and am dissapointed that it was not needed.
ipd customer service response: The "R" models have Brembo calipers and are the only exception to the application. Brembos have punch out pins, all other models require this socket to remove the bolts. We will fix our product description to exclude "R" models.
April 2008
To leave your own Review, Drill down on the specific product above.
|
