|
11744 NE Ainsworth Circle
Portland, OR 97220
Google Maps
503-257-7500
1-800-444-6473
|
 |
H&R TRAK+ Wheel Spacers If you've searched for wheels for your rear wheel drive Volvo you've likely found that there is a pretty limited selection of aftermarket wheels that will fit your Brick. The selection available for newer, front wheel drive and all wheel drive Volvos while still somewhat limited, is much larger. The bolt pattern on all Volvos from the early 70s until today is the same - 5x108. When Volvo changed to FWD they also changed the offset (how far inboard or outboard the wheel sits on the hub). The difference in offset is roughly 25mm. Adding 25mm spacers to your RWD Volvo will allow you to mount most front wheel drive Volvo wheels on your 700/900 series car.
When considering making this change there are many factors to consider. Modification to the wheel wells may still be necessary and offset can vary slightly depending on manufacturer and size. For further information on mounting FWD wheels on a RWD car please call us.
Whether you want improved handling, increased safety or simply desire your car to make a statement about your individual style, TRAK+® Wheel Spacers can help you accomplish your goal.
Features:
- Hubcentric
- Maximizes vehicle track width for great looks, lowered roll center, and increased lateral stability – improved handling
- Made of a proprietary aluminum/magnesium alloy (Up to 70% lighter than a comparable steel product)
- Hard anodized to ensure a tough, durable finish
Please check fitment listed below to ensure products will fit your specific vehicle. Some products may include or exclude some model years or engine and transmission combinations. The products listed on our website are for Volvos sold in the North American market. Many of the parts are exactly the same as those used in other markets, however we cannot guarantee fitment for those markets.
ipd does not charge your credit card until the product actually ships from our warehouse.
Click here to ask a question, report errors, pricing issues or missing applications.
HR5035652 Reviewed by Chris from Australia
A beautiful piece of gear. I bought some for my 240 well over a year ago. Make sure you get all the rights lug-nuts- you may need a couple of different threads depending on your model of car. Also make sure you file down the top of the brake disc locating bolt so the spacers fit flush with the hub
Overall a really nice product and the results are very impressive, both performance-wise and cosmetically.
May 2009
HR5035652 Reviewed by mark from port washington WI
I was able to get alloy rims form a '96 940 onto my '89 740GL...looks great.
May 2008
HR5035652 Reviewed by Greg from Victoria BC
Well made & very light!
Important Note!
Torque specs of 700 series applies to the studs on these adapters. 66 lbs!
April 2008
To leave your own Review, Click on the specific product above. |
