Front Parking & Turn Signal Lamps

1.) I checked many web sites for price. Most were higher, yah there was one lower by a couple bucks. 2.) I've ordered from "ipd+" before, always quality products. 3.) So I ordered. 4.) Putting the new assembly in is the reverse of taking it out. To put the assembly in you line up the prongs on the new unit and push it in! It will snap into place. Okay, but you need to take the old assembly out first... this is what I did: My old assembly's lens cover fell off. So, without damaging any metal or plastic surround the assembly, I used pliers to pull it out, yeah at first I broke off a little plastic, but then I got a firm grip, yanked, and out it came. 5.) I unscrewed the bulb from the old unit and then screwed the bulb unit into the new unit. Pushed the new assembly in (making sure the prongs were lined up). And everything was fine. Oh by the way, when you pull out the old unit, you'll see a rubber thingee on the air escape hole, take that off, and put it on the new unit!

Excellent fit and finish. Fit in with a simple snap. The bulb sockets snapped right in.