Interior Fasteners

This kit worked really well. Took only about 30 minutes, even working upside down on the open tailgate. Good product.

This is an excellent kit and got rid of most tailgate rattles, not to mention the problem
of the entire interior panel coming unfastened when the door is closed. I found using
a wide putty knife and screwdriver carefully together is a great way to get the latch
trim unclipped without damaging it. As in other reviews, having a drill handy is a
good idea for quickly attaching the metal pieces inside the tailgate trim. I also took
the opportunity to bang on the tailgate a while to locate any stray rattles inside. I
tightened the wiper motor assembly and lubricated the latch mechanism. The entire
process took less than 30 minutes. Thanks again IPD, for an awesome solution to a
small but irritating issue on my 850!

This repair kit provided all I needed to fix my tailgate interior panel, which broke clean away from the tailgate. It took about 30 minutes, using just a drill (to make pilot holes for the small screws), pliers, hammer (to custom shape the metal brackets) and screwdriver. I had to take the inside handle off, and needed to use a torx tool to take it on and off. Don't forget to replace ALL plastic fastener parts. Since my car is 10 years old, all of the old clips were brittle, even though some still worked. Everything snapped into place, and it is now tight and rattle free!

I don't know why I waited so long to do this. It was so easy.
I was able to get the handle trim off easily, one clip broke but I was able to superglue it.
Drilling the holes and putting the plates on were a breeze, it took about 15 minutes.
Then the tailgate panel just snapped right in. The ride in my V70 is now quiet, finally!
Thanks IPD!

I was so happy with this product, mostly because it saved me major money, but also
because it was so easy to install. The hardest part was getting the trim around the
handle off. I ended up breaking mine and breaking another one at a junk yard. I
was able to repair that with superglue. My suggestion is don't do it when it is freezing
cold out, because the plastic will break. Instructions were easy to understand and the
no more rattling in the back. Thanks iPd!

Dealer charges $135 for this repair! Kit is a bargain at twice the price.

The kit itself is great. Once I had the panel removed, installation of the kit components is a breeze and they hold great. Unfortunately, removing the interior handle trim is a real pain. Despite a lot of effort, I broke my handle. Two steps forward, one back. Where's the handle trim kit for sale on the website??

Works quite well. Be careful when removing trim around rear interior hatch release.

I was impressed with the simplistic yet effective design of these clips. They were easy to install, the whole job took less than an hour. Well worth the money. I had no idea there was any kind of repair kit for these until I found them browsing your website. Thanks IPD.

Our tailgate panel was so bad it was only hanging on by two clips so disassembly was pretty quick. This was a great fix and easy to do in a short time. I also predrilled the screw holes in the plastic and then hand screwed them in due to the poor condition of the original plastic. Only problem was one of the new bottom clips broke off when we were putting the panel back on. Luckily we had two of the old clips that weren't broken. Dealer quoted us $260.00 to fix the panel and the lock, which is now working fine since the loose panel is no longer interfering with the locking mechanism. Great product.