11744 NE Ainsworth Circle
Portland, OR 97220
Google Maps
503-257-7500
1-800-444-6473
|
 |
Volvo 850 » Cam Locking Tool
 Misalignment of the cam shafts during a timing belt replacement in the 5 and 6 cylinder engines can be a costly mistake. Our cam locking tool holds the camshafts in place during timing belt replacement to prevent unexpected movement and ensure proper cam shaft alignment. Made from 3/8 inch anodized aluminum plate with 3/16 inch dowel pins spaced for placement in between the intake and exhaust cam gears. Please check fitment listed below to ensure products will fit your specific vehicle.
Some products may include or exclude some model years or engine and transmission combinations. Click here to ask a question, report errors, pricing issues or missing applications.
T850CT Reviewed by GARY HIX from NC
Used this tool this weekend on my 850. At first I did not think it would do the job. After struggling in the confined space of the engine compartment, I was happy to have the assurance that I had not moved the camshafts. The fit is close and all four pins engage. It can be knocked out if you are not careful. I will be using this tool on my S70.
September 2008
T850CT Reviewed by Bentley from Frisco, TX
This tool is cheap insurance to ensure that nothing moves that isn't supposed to when replacing a timing belt.
One note for the first time user: I found it necessary to experiment around a bit to determine which pins to position in the appropriate sprockets of the gears. Once it was positioned, though, it was obvious it was in the right piece. The tool inserted with a fair amount of friction...no "slop" at all. Also, I initially assumed that all four pins would engage with the cam gears. As it turned out, there were only 3 of the 4 pins that were engaged with the gears....not all 4.
June 2008
T850CT Reviewed by michael Delk sr. from louisville,ky
This tool locks the cams tighter than fort knox. used it on my 98 v70 and this weekend on my 96 850 buy one it works great.
December 2007
To leave your own Review, Drill down on the specific product above.
|
