Volvo 700 » Aquamist Water Injection Kit

We’ve used Aquamist systems on several of our high output turbo projects with excellent results. Typically an Aquamist system will allow your engine management to maintain full ignition advance at full load. This system is especially effective on the 2004 to 2007 R models as the stock intercooler system is inadequate when ambient exceeds 80 deg F. It is also part of our new stage III kit for 1994-2000 turbo models.

The main function of these systems is to suppress detonation caused by high temperature and pressure developed within the combustion chamber when the effective compression ratio has been taken beyond the auto-ignition point by a turbo (high boost). Water, with its high latent heat content, is extremely effective for controlling not only the onset of detonation but also the production of oxides of nitrogen in modern leanburn engines like Volvos. Aquamist products are designed with great care to ensure each system meets the highest standards of both electronic and mechanical reliability. We stock the 1-S water injection system and the DDS3 monitoring system, which is all you’ll need for most Volvo installs including excellent instructions. We can supply the full range by special order. Allow 2-4 hours for typical installation time.



Aquamist system 1S water injection kit includes: 100psi race pump, adjustable boost switch, filter, relay, harness, tubing (inc. 3 jets)

Here is an installation overview PDF.

Here is the AquaMist website: http://www.aquamist.co.uk/ 

Here is the AquaMist Users Forum: http://www.aquamist.co.uk/phpBB2/