|
11744 NE Ainsworth Circle
Portland, OR 97220
Google Maps
503-257-7500
1-800-444-6473
|
 |
Suspension Bushings Rear (Individual) Please check fitment listed below to ensure products will fit your specific vehicle. Some products may include or exclude some model years or engine and transmission combinations. The products listed on our website are for Volvos sold in the North American market. Many of the parts are exactly the same as those used in other markets, however we cannot guarantee fitment for those markets.
ipd does not charge your credit card until the product actually ships from our warehouse.
Click here to ask a question, report errors, pricing issues or missing applications.
672226P Reviewed by Derek H from California
These seem pretty well made and do their job nicely. Poly bushings need periodic greasing with synthetic grease to remain happy and bind-free. To make this easy I installed grease zerks on the torque rods, trailing arms, and the panhard rod. I then ground a heavy chamfer on the outside edge of each bushing half to give a channel for the grease to flow around inside from the zerk. Also I ground four radial grooves on each inner face to allow grease to flow to the center steel spacer.
Make sure you install both bushing halfs first and then the center steel spacer. If not then the trapped air can make it impossible to seat the two halfs together.
April 2009
To leave your own Review, Click on the specific product above. |
