The Volvo Specialists
McAfee Secure sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams
Basket Summary

Your basket is empty

Product Search

Volvo 140 » Camshafts & Related Parts

If your car seems to be down on power, and a compression test and a bit of tuning ensure that everything is well within spec, it may be time for a new camshaft. Unevenly worn lobes can cause a rough idle and can diminish the motor's ability to create power at higher rpm's.

When choosing a cam, keep in mind that in most circumstances, performance and drive-ability often lie at opposite ends of the engine tuning specturm. In the world of camshafts, bigger is not always better as the specs of your motor should determine what cam would be the most appropriate. Give our knowledgeable staff a call as we have proven recommendations for almost all applications.

ipd cams are ONLY warranted when installed with new lifters.


Please check fitment listed below to ensure products will fit your specific vehicle.
Some products may include or exclude some model years or engine and transmission combinations.

Street Performance Cam
ipd#:2A7001
Brand:Isky
Fitment:B18 & B20 engines 1962-1975
Our most popular performance cam. At 260 degrees duration and .441" gross lift, this model has a broad power band starting at 2500 rpm up to 6000. "There is usable power all the way to red line and yet the engine is very tractable at low speeds as well." Road & Track, 1974
 Larger Image, Installation Info & Product Reviews »
Each: $188.00
Stock Level Good
QTY
Street Torque Cam
ipd#:2A7006
Brand:Isky
Fitment:B18 & B20 engines 1962-1975
At 256 degrees duration and .425" gross lift, this grind is ideal for low and mid-range performance engines. Use with automatics for maximum performance or 4-speeds when low-end torque is important.
 Larger Image, Installation Info & Product Reviews »
Each: $188.00
Stock Level Good
QTY
C Grind Camshaft
ipd#:2A8707
Fitment:Stock Volvo grind used on late B18 and all B20 carbureted engines.
262 degrees duration, .396" gross lift
 Larger Image, Installation Info & Product Reviews »
Each: $86.00
Stock Level Good
QTY
D Grind Camshaft
ipd#:2A9258
X-Ref: 1218580
Brand:EPC
Fitment:Stock Volvo grind used on fuel injected models.
262 degrees duration, .424" gross lift
 Larger Image, Installation Info & Product Reviews »
Each: $80.57
Stock Level Good
QTY
Hi-rev Lifter Kit
ipd#:2A5060
Fitment:All B18 & B20 engines
A necessity for performance engines. Tubular pushrods offer increased rigidity to ensure maximum valve lift. Lifter are a shorter design than the factory original, but work extremely well with our new grinds.
 Larger Image, Installation Info & Product Reviews »
Each: $159.00
Stock Level Good
QTY
Lifters OE Style
ipd#:2A8501
X-Ref: 1218630
Brand:Usually Scantech
Fitment:All B18 & B20 engines (8 used)
Any time you change a cam, you also must change the lifters - reusing them is not an option.
 Larger Image, Installation Info & Product Reviews »
Each: $9.50
Stock Level Good
QTY
Retaining Plate for Cam
ipd#:2A9681
X-Ref: 419681
Brand:Volvo
Note:Supply is intermittent; Currently Out of Production
Fitment:All B18 & B20 engines
Restore proper end thrust clearance with a new retaining plate. Bronze material.
 Larger Image, Installation Info & Product Reviews »
Each: $34.84
Stock Level Good
QTY

Click here to report errors, pricing problems or missing applications.

Customer Product Reviews

There are currently no reviews of this product.

To leave your own Review, Drill down on the specific product above.