Volvo 122 » Suspension & Steering

ipd safety anti-sway bars bring you a greater sense of control behind the wheel. Flatter cornering, quicker response to steering input, an increased margin of safety, plus increased traveling comfort for both you and your passengers. ipd anti-sway bar kits are installed using factory mount

Ball joints and tie rods are key components in your suspension and steering system. These are parts that need to be replaced BEFORE they fail. Tie rods ensure that the act of steering results in the front wheels turning the direction you want to go (this is really important stuff). Ball joints hold

If your Volvo doesn't track straight down the road and you've had difficulty getting the front end properly aligned, the suspension bushings may be worn or broken. Clunking sounds when driving on rough or graveled roads, or squeaking noises over railroad tracks or intersections are also key indicat

If your Volvo doesn't track straight down the road and you've had difficulty getting the front end properly aligned, the suspension bushings may be worn or broken. Clunking sounds when driving on rough or graveled roads, or squeaking noises over railroad tracks or intersections are also key indicat

The original rubber bushing is getting hard to find. Consistent supply has been a problem. When we could get the originals they cost about $76.00 each. The high price makes the restoration of the rear suspension a costly endeavor. Our polyurethane design solves the problem. This new bushing is made

If your steering feels loose and you've confirmed that the bushings, ball joints, tie rods and steering box adjustment are all in good order, check your steering coupler. Early 122s used a round rubber disc, later 122s used two grommets. 1800s used a different coupler altogether. Our 122 couplers a

It seems like Volvo has always made things heavier duty than they need to be and wheel bearings are no exception. Like most anything else, neglect is the main reason for failure. A good rule of thumb is to repack the wheel bearings every brake job. Just set aside the time to do it right. Have on han