|
11744 NE Ainsworth Circle
Portland, OR 97220
Google Maps
503-257-7500
1-800-444-6473
|
 |
Exhaust Headers Whether you want to add some pep to your pushrod Volvo, or you just need a replacement for your rusted out OE cast iron manifold, these headers will do the job. Shipped with a transit coating that will burn off at startup - for best results, order yours ceramic coated or paint with a hi-temp exhaust paint (we like 'woodstove paint' from the hardware store).
Mandrel bent 16 gauge steel, reduces to just over 2" ID after the collector. Note: won't match up to factory exhaust - you'll need some custom work to connect it up.
Note on ceramic coatings, they not only provide great looks and rust protection, they also reduce radient heat transfer. This helps reduce excessive heat warming the intake manifold and also speeds exhaust gases exiting the engine - both power enhancers. Please check fitment listed below to ensure products will fit your specific vehicle.
Some products may include or exclude some model years or engine and transmission combinations.
We offer some products with multiple brand options. Products ending with an "E" suffix indicate Economy (non-OE) brands.
Click here to ask a question, report errors, pricing issues or missing applications.
2C0301 Reviewed by fritz k from stl
nice installation experience. The toughest part of the install was removing the old head bolts. Really. Otherwise it was simply a matter of time, patience and precious few tools. I do not believe that headers are typically so co-operative. I particularly appreciated the stud/locknut hardware offered separately.
tweeks-the gasket I got did not allow for the mounting stub which aligns the (injected) intake. A couples of snips, though, and we were back in business.
Also, the manufacturer calls for a pitence of copper gasket dressing so limited that the potential for good will by including it in order to enable an "all-in-one-kit" feature/benefit would certainly outweigh omitting this detail, I think.
August 2009
2C0300C Reviewed by Pete from The Florida Panhandle
A great addition to the engine in my '72 ES. Looks great - better than chrome to me. Sounds as good as it looks, and an easy installation. i had to drive without out anything hooke dup to it to the muffler shop and make syou feel like Roger the Race Car dirver;-)I replaced the rest of the exhasut system with it's installation. I it coupled to a 2.5" exhasut with a pair of glass packs. The driving difference was noticible. On a subjective level, the engine seemed to me to run better. Thx IPD!
August 2007
2C0300C Reviewed by Tim Sigler from Portland, Oregon
I am the original owner of a '73 142e. Back in the late 70's I put a set of ipd headers on my car and they are still doing their job. I noticed a power increase from the moment I installed them and was always impressed with how heavily they were built.
Now, after more than two decades, they are starting to leak from the collector and need to be replaced.
I am not sure what more you can say for ipd quality than to have an exhaust component last this long. Like many other ipd components on my car, the headers were a fantastic bargain when you look at the cost per year of service.
Thanks, ipd!
July 2007
2C0300C Reviewed by Greg Sievert from Melbourne, Australia
Thanks IPD for shipping the header to me in Australia! It arrived in great shape and fits perfectly on my 1800ES. The ceramic coating looks great and I'm sure it will give me years of pleasure on the car.
July 2007
To leave your own Review, Click on the specific product above.
|
