Lubri Moly - Professional Grade Fuel and Engine Treatments
Lubromoly was founded in the mid 1950s in Germany. Their extensive research and development was specifically aimed at the automotive engine to improve its longevity. Later as engines were designed to run as lean as possible, the need for fuel additives increased and Lubromoly was there developing products to solve hesitation and drivability problems. At that time most products were only available at the professional repair shop level. Now the same additives are available for every day use to maintain and keep you engine and fuel system in peak condition. Lubromoly products incorporate the most advanced materials available along with tried and true features of the past.
Jectron Fuel injection Cleaner
Formulated specifically with the K jet/CIS injection in mind as used on the 1974-85 Volvos. It cleans the fuel distributor and injectors, improving starting, idle, throttle response and mileage. The improved injection pattern and more precise control of the injected fuel quality means that the engine burns cleaner and uses less fuel. Also, driveability is improved: easier starting, less stalling, smoother idling, better throttle response, no run-on after the ignition is shut off. Add a can to a full tank of gas and repeat every other oil change for best results.
Ventil Sauber (Valve Cleaner)
Removes carbon deposits from valves and combustion chambers. Especially important in the mid-1980s LH injection cars that had a high build up of carbon deposits on and around the valves. It also helps protect the fuel system against corrosion and icing. Great for both injected and carbureted cars, and is safe for catalytic converters and turbocharged engines. Just add a 300ml can to your full gas tank. Repeat every other oil change for best results.
Fuel System Cleaner
Reduces the CO and HC emissions and prepares the vehicle for a smog test. Successfully tested to international CEC standards. Can significantly improve cold-start difficulties, rough idling, poor throttle response, loss of performance, lean surging, and high exhaust emissions. Add a 500ml can to a full tank of gas to renew the fuel system. Repeat every other oil change for best results.
Anti-Friction Engine Treatment
Forms a friction and wear reducing moly film on all internal moving surfaces of the engine. Engines will actually run smoother, quieter, cooler, and more reliably, with an extra measure of protection under extreme operating conditions and cold start situations. Anti-Friction treatment will not harm catalytic convertors and mixes with all commercial motor oils, petrolium and synthetic. Add one can to your engine with each oil change.
